1837-41 Morning Dress Patterns of Fashion 1 – Highly Commended Award

In this post I’m going to go over my process for my entry into the 2020 Costume Society Patterns of Fashion Award. This will cover my planning, research, toiling, fabric selection, construction, styling, final judging and a reflection on my experiences.

Deadlines for the competition were as follows,

7th of December 2019 – Deadline for application form
This application form registers your interest in the award, it is essential to do if you plan to participate.

30th of January 2020 – Deadline for submitting a slideshow containing images of the finished garment both interior and exterior, toile process and any other relevant information
Note that normally the Costume Society Conference would take place later in the year for final judging where (if selected as a finalist) you would bring your finished garment, a research file, work book, copies of the pattern/relevant POF book pages and any other material you felt necessary to judging. Because of this the powerpoint does not need to be overloaded with information just key details of your process.

Unfortunately due to the Covid-19 pandemic the Costume Society Conference could not take place this year and judging happened online via video chat. 


Planning

Planning for the competition began at the end of my second year, one of my tutors organised for any interested students to come to a meeting after our final hand in to discuss the competition, look over the garments we were interested in and discuss our decision.  This wasn’t a final decision, there was all of summer to reconsider but having the discussion then would allow for research and planning to be done over the holidays.

I had narrowed my choices down to three dresses,
1837-41 Morning dress, 1827-9 wedding dress and the 1745-60 jacket and petticoat (All from Janet Arnold Patterns of Fashion 1)

My biggest consideration when selecting a dress was that I wanted it to be hand sewn, hand sewing a dress was seen as a bit of a taboo in the 3rd year studio as everything is so time critical. My tutor did attempt to dissuade me from choosing a hand sewn dress, citing a previous student hand sewing a dress and how much time it took them and the stress it put them under.
But I was pretty determined, I knew that a completely hand sewn dress would be a stand out piece of my portfolio it would also allow me to further develop and refine my hand sewing skills, immerse myself in period techniques and engage with primary and secondary resources which is one of my favourite aspects of historical dress.

When it came to selecting a dress I decided on the 1837-41 Morning dress – Gloucester Museum.
Screen Shot 2020-01-24 at 11.48.40
My reasons for selection this dress over the other two were as follows,
It predates the sewing machine fulfilling my hand sewn criteria. I believed it would be achievable to make in 12 weeks, this is due to the simple base cut of the bodice and skirt which are embellished upon with decoration.  Sourcing materials would be straight forward, as I wanted to reproduce the dress in its entirety (The Costume Society does suggest making from calico or other neutral fabrics to reduce costs but this is a just suggestion)  the fabrics used for the original dress would be straightforward to source or find a modern substitute for.
My reason for not following the suggestion of using neutral low cost fabrics is simply because I knew I would be putting a lot of time into the costume, that it would be on display at degree show/in my portfolio and that I had the intention of selling it. I could not justify making it from plain fabrics, I wanted it to have the same grand appearance as the original and stand out in displays and also for it to be profitable.
I understand not wanting to use expensive materials for financial reasons and that is a decision down to each individual.
For perceptive the material costs for this garment was approximately £250.


Research

As mentioned above I wanted to use my summer break to get all of my research done for the dress in time for my return to university. My top priority was enquiring if I could view and examine the original dress, it did take me a while to get in contact with someone at Gloucester Museum to arrange an appointment but I was successful in doing so. At my appointment I met a curator who showed me to the dress which was laid out on a table, I was given a pair of gloves so that I could move smaller elements of the dress on my own and the curator helped me with turning the dress over.
I must have spent three hours looking over the dress and I took hundreds of pictures of everything imaginable. I also took notes as I went over the dress but I really found the pictures to be my best point of reference. While my notes were great sharing the pictures  with my tutors was very helpful when I got stuck. I really recommend taking as many pictures as possible and of everything, even simple things such as the stitching on the hem as it will just give you a visual reassurance even when it seems straight forward.

I do plan to make a separate post containing all of my images I took of the original dress (or maybe a public google album). For now if you would like them please get in contact and I can send them.

In addition to viewing the original dress I also viewed three other dresses from the 1830’s in the National Trust Killerton Estate Textile Archive. I found viewing these dresses really beneficial to my research and it gave me a broader view as to how dresses were constructed during the period. In addition to this each dress had a similar attribute to the 1837-14 Morning Dress, the brown dress had a very similar cut bodice, the plaid dress had similar smocking on the sleeve and the girl’s dress like the morning dress had a lot of piping on the bodice.
Viewing other garments in addition to the original dress (or if the original can not be viewed) is a really great source of construction evidence. For example if you didn’t know exactly how a waistband was attached on the original because the pattern is vague or the waistband is obscured on the original, citing other extant garments as your reasoning for how you approached it is great method of problem solving and shows great investigation skills.
I was praised during judging for examining addition dresses from the period. 

(in order 1830s Brown Dress, 1830 Green Plaid Dress, 1833 Girl’s Green Dress )

The National Trust is defiantly worth looking into for extant garment research (They also hold a few Patterns of Fashion garments). You can search through their online archive using the National Trust Collections Page you can refine the search to Places, Category (costume!) and Date. You can view a maximum of three items and there is a £25 charge for the use of the service. Booking an appointment is easy, email the location, explain your interest/reason for wanting to view the items and include the NT item number for the items you want to view in the email.
The staff at Gloucester Museum and Killerton Estate were extremely helpful and I’m very grateful for the opportunity to view the dresses.
I recommend enquiring about viewing extant garments in advance (this goes for any location, museum or archive) as there is usually a few weeks wait before you can be booked in.

I really stress doing your research over the summer holidays if you can. Doing so gave me a leaping start when I got back to University. I had all of the information, reference and visuals to get started from day one. Had I been chasing museums for appointments it would have put me back weeks and I’m sure I would have made mistakes along the way that would have been time critical or irreversible. This is especially important if you are hand sewing a garment. I averaged eleven and a half hours at university everyday, you need to devote all of your time to being productive. 


WorkLog

Toiling

I began my construction process with scaling up the pattern from Patterns of Fashion 1. This was done using 1” dot and cross paper to ensure accuracy to the scale used in the book. With my complete dress pattern I began the process of toiling to ensure everything lined up, resolve any issues and test procedures and decorations.

 IMG_1058I found the bodice came together nicely, noting that the bust dart required a large amount of ease, I marked the mid point on either side of the dart, this could then be used to match when joining together and easing the fabric between these points.


I sampled sewing the piping onto the vandyke decoration, practicing how the piping would be turned over without visible stitching, this included clipping into and mitering the points. I also realised at this stage that the piping size I was using (size 2) was larger than the size used on the original dress, when constructing the dress I downsized to a size 1 cord.
Screen Shot 2020-08-05 at 19.50.36
I decided to test the smocking on the sleeve, the sleeve pattern features small dashed lines that are used as a guide for how large the stitches should be, I encountered a few issues with this trial.
The first issue was that these dashed lines were far too large to replicate the original smocking on the dress but I acknowledge that they were most likely intended to be used as an indication that the direction of the smocking stitches followed.
Screen Shot 2020-08-05 at 19.53.55
First smocking test.

As I had the opportunity to examine the original dress I knew from looking at the interior of the sleeve that the stitches were tiny, no more than 1-2mm in length. I produced a sample following this smocking stitch size and found that it resulted in a very near match to the original.

The second Issue I found was that the grading for the smocking was slightly uneven (using the marked lowermost line to grade upwards). Grading the smocking evenly up from the lowermost line would cause the top two lines of stitching to wiggle in and out over the edge of the pattern. To fix this issue I applied the measurements that I had taken from the original dress and graded downwards from the sleeve head.
I had measured that the distance between each line of stitching was approximately 8mm and using the start and finish of the smocking stitches on the pattern as a guide I marked this on the sleeve.
While on the original dress I could find no visual indicators that the smocking lines were marked, the smocking did appear to be very consistent from an interior and exterior point of view.

The third issue I found was in the pleating of the skirt, for the purposes of the toile I cut myself a croped length of the skirt so that I could test the pleating and gathering.
The pattern states that the center front of the skirt features a 1” box pleat, with adjacent sides of the skirt 1” knife pleated in the direction of the centre front, the pleating continues until it meets the gathered portion of the skirt at the back of the dress, the centre back is slashed open with gathering 4” either side.

Screen Shot 2020-08-05 at 20.04.10When toiling the knife pleating I soon realised that the pleat depth was too deep which was causing the pleated portion of the skirt to finish at the centre back (well beyond where it was meant to finish), this left no room for the additional 8” of gathering at the centre back.

I decided to sample a shallower pleat depth to see if this would bring the pleats back to where they should be sitting and allow for the 4 inches of gathering before the centre back.
I reduced the pleat depth down to ¾” and the issue was immediately resolved. The pleating finished 4” from the centre back allowing for the remaining fabric to be gathered down.

The final issue I found in pattern was one that I didn’t catch until far too late. In the pattern for the vandyke decoration Janet Arnold draws it with 12 points and I did not  question this. It wasn’t until I had made the decoration up and was attempting to mount it onto the bodice that I came to the realisation that the original decoration only has 11 points. I realised this because I was struggling to get the decoration to lie flat as it does in the original dress but it refused to. I identified that the 7th point (counting up from the bottom) could be pinched (omitting it) and this would cause the vandyke to lay smooth against the bodice rather than puckering. What’s more is that Janet’s illustration of the full dress correctly depicts the vandyke with 11 points, it is her pattern that is incorrect with 12 points.
I believe that had I noticed this earlier, corrected the pattern to remove the 7th point and then redistribute the other points on the pattern my vandyke decorations would have sat flat against the bodice as seen on the original dress.

I do want to note though that I’m not sure changing the pattern would be in accordance with the Patterns of Fashion Award guidelines as you’re supposed to make the garment up as it with no alteration. Within my submission I found issues with the patterns but I manipulated them to work to the best of my ability without making alterations.


Fabric Section

Screen Shot 2020-08-05 at 20.12.20For my reproduction of this dress I decided to select materials to match the original as closely as possible.
In patterns of Fashion 1 Janet Arnold doesn’t specify what kind of silk the dress is made from, in my research examining other day dresses of the period I knew it was likely made from taffeta as this was a common for the period. When examining the original dress I identified it to be a silk taffeta. I had brought along with me a selection of silk swatches (mostly taffetas) in brown shades so that I could best match the original dress.
I decided on a silk taffeta from Silk Baron in the colour ‘Topaz’, this taffeta had a really nice weight to it, ideal for the dress and was a near perfect colour match to the original dress.

The original dress used glazed cotton for the bodice and skirt lining, I struggled to find a supplier for glazed cotton and after a discussion with my tutors about similar fabrics that could be used as a substitute I decided on cotton silesia. I bought white cotton silesia, I cut my bodice pattern pieces from it and cut a strip for the waistband, the remaining silesia was dyed a light brown to match the skirt lining.

Screen Shot 2020-08-05 at 20.13.30

Calico was used to line the sleeves in the original dress, I selected a medium weight calico to replicate this which would help give body to the smocking and further sleeve.

I also used 100% cotton muslin to back the vandykes, I am unsure if the originals were backed but I felt the single layer of silk would need some support, the sleeve bands were also backed using this muslin. I had identified while examining the dress that the sleeve bands were backed with a loose weave fabric but as I could only see a small fragment of this material I was unable to identify the fabric with 100% certainty.

The muslin was dyed a light brown colour.

I also selected a brown 100% silk thread to use to sew the dress together.
I also used brightly coloured polyester threads for basting and tacking, the bright colours made them easy to see/identify and remove at the end of construction.


Construction

I cut out all of my pattern pieces, using a ½” seam allowance on all seams but the centre front which I added a 1” seam allowance to. This was because I noted that these seam allowances were of that size on the original dress.

I began my construction with basting all of the bodice silecia layers to the silk layers along the pattern lines to serve as a guide and prevent the two layers from shifting. I also marked any construction lines such as the placement line for the vandykes, the point where the decorative sleeve band crosses over etc.
This same process was used for the silk sleeve and calico lining.

I decided to get the smocking on the sleeves done first as I knew it would be a time consuming element to recreate. I started with grading the smocking onto the calico lining which I had already tested the placement in my toile.
I then started the long process of sewing the smocking stitches into the sleeve, I doubled my silk thread for this as I wanted the lines of stitching to be as durable as possible to prevent the threads from snapping. Because the stitches are so small (1-2mm in length) I found it was much more time effective to use a running stitch and catch the fabric multiple times in one stitch rather than sewing each stitch individually.

Screen Shot 2020-08-05 at 20.39.04

It took 12 hours to sew the smocking stitches onto each sleeve.
After sewing the smocking I decided to make up all of the piping I would need for the dress, I took measurements over the dress and estimated how much piping I would need and also noted what areas required longer/continuous piping.  I cut 1” wides strips of bias from my silk taffeta and made up the piping by tacking the size 1 cording into the folded bias strips.

When the smocking was completed I moved on with making up the rest of the sleeves, I started with the cuffs, tacking the piping to one side of the silk cuffs before taking down the other side of the cuff. The sleeve was prepared, I sewed the sleeve seam up using a back stitch to the notched point on the pattern where the sleeve placket is. I constructed the sleeve  placket by folding both the silk and calico layers inward, leaving a slight step so that the calico was folded a few millimeters back further. This was then fixd down with a bar tack at the top of the placket on the inside to prevent the fabrics from shifting and then the calico was whipped down to the silk with small stitches.
Next two lines of gathering were sewn just above the construction line into the seam allowance between the two notch points indicated on the pattern. The threads of these gathering stitches were then pulled so that the end of the sleeve was reduced down to the width of the cuff.

Screen Shot 2020-08-05 at 20.40.52

The cuffs were then sewn right sides together to the sleeve, catching the lowermost row of piping so it was snug between the sleeve and the cuff. The wrong side of the cuff was then whip stitched down to the calico along the pattern line with the seam allowance folded up on the inside.

Screen Shot 2020-08-05 at 20.41.38

Screen Shot 2020-08-05 at 20.43.16

Next I began constructing the bodice, I tacked all of the piping onto one side of the seam before tacking down the other side securing the piping between the two pattern pieces. These seams were then sewn permanently with my silk thread using a back stitch.

Screen Shot 2020-08-05 at 20.45.20I found that the bust darts required easing in order for them to match up, I did this by marking the centre of each side of the darts, matching them up and distributing the ease evenly above and below these points.

The armhole was pipped in preparation for the sleeve to be sewn in but the neckline and lower edge of the bodice was left as these are finished off later in the process.

With my base bodice out together I moved onto making the decorations for the dress.

Starting with the vandykes, I basted the silk layer to the supporting muslin layer. The piping was then sewn on, I had to be carul during this process and precise with my sewing to ensure that when the piping was rolled over none of my stitches would be visible, this was particularly crucial over the zigzaged portion of the vandyke.
The next step was to roll the piping over and secur it to the wrong side, this was a straightforward process on the straight edges of the vandyke as they rolled easily and I secured them with a running back stitch. The zigzagged side had a few more steps involved. In order to get the outer points to turn over cleanly I clipped into and mitered the points, the inner points were also clipped into. Once this was done they were free to roll back to the wrong side where the seam allowance was back stitched down to the muslin layer.
The bottom of the vandyke was left unpiped, this is because it will be caught by the piping applied to the over edge of the bodice later on.

Screen Shot 2020-08-05 at 20.46.57

The vandykes feature small pleated bands which cover the inner points, initially to create these I tried pressing pleats into bias cut strips of taffeta but found the taffeta to be too springy for this and it would not hold the shape. I then decided to experiment with creating a small scale pleating board which could be used to get the tiny knife pleat to sit flat.

Screen Shot 2020-08-05 at 20.47.54Using some thick card paper I created the pleating board y soring the card and folding it into shape, I made two of these boards so that the silk taffeta could sit between them. Using clips I secured the taffeta between the boards and started to steam and press down on my pleating boards. I was very pleased when I had fantastic results straight away.

Screen Shot 2020-08-05 at 20.48.52

Once I had pleated up the fabric I carefully cut out sections to use for the bands on the vandykes.
They were then sewn to the vandykes, right sides together and rolled around to the wrong side where they were whipped down.

Screen Shot 2020-08-05 at 20.49.58

Next I made up the sleeve bands, they were also basted through to the muslin layer and the button placement was thead marked.

Screen Shot 2020-08-05 at 20.51.42When I examined the original dress I measured that the piping sits approximately 1cm away from the edge of the sleeve band, with this in mind I tacked my piping 1cm away from the raw edge with the seam allowances facing outwards. In order for the piping to curve around the pointed ends of the sleeve band I clipped into the piping seamallowence in these areas, this released the piping slightly allowing for it to curve around the points.
I then sewed on a strip of bias cut taffeta, this taffeta strip was sewn on the same stitching line as the piping and would act as binding encasing the raw edge of the sleeve band. As with the piping I had to allow the bias strip to curve around the point of the band, however from examining the original dress I knew that three small pleats were inserted into the strip which allowed it to curve. I applied this technique to the strip and then finished it off but folding it over to the wrong side and whipping it into place.

I then moved onto sewing the sleeve onto the bodice, in order to do this the sleeve had to be smocked down. I took the armhole measurement from the bodice and used this as my guide to smock the sleeve down to fit. This was another long process, I was very nervous about threads snapping so I took it slowly, easing the threads smaller in increments working my way through each row. It took approximately 5 hours to reduce each sleeve. When I was happy with the size and I had tested it fit the armhole I evened out the smocking until I was again happy. The long threads were then tied off to prevent them from loosening.
The sleeve was then inserted into the armhole and back stitched into place.
Screen Shot 2020-08-05 at 20.53.14
I then made covered buttons (1.5cm in diameter) which were sewn directly onto the thread marked position on the sleeve band.

Screen Shot 2020-08-05 at 20.55.22I then moved onto sewing the sleeve onto the bodice, in order to do this the sleeve had to be smocked down. I took the armhole measurement from the bodice and used this as my guide to smock the sleeve down to fit. This was another long process, I was very nervous about threads snapping so I took it slowly, easing the threads smaller in increments working my way through each row. It took approximately 5 hours to reduce each sleeve. When I was happy with the size and I had tested it fit the armhole I evened out the smocking until I was again happy. The long threads were then tied off to prevent them from loosening.
The sleeve was then inserted into the armhole and back stitched into place.

Screen Shot 2020-08-05 at 20.57.33

Next I attached the sleeve band, this was a straightforward process as I knew where the band crossed over on itself and where that crossover point sat on the sleeve. I lined these points up and carefully stitched it into place from the inside of the sleeve. I noted during examining the dress that the band appeared to have tacked at the seam on the sleeve and that the points on the bands had also been stitched down securing them in place. Again from the inside of the sleeve I sewed small tacking stitches through the seam of the sleeve and catching the ‘ditch’ of the piping on the sleeve band, securing it. The points of the sleeve band were also secured in the ‘ditch’ of the piping which further helped hide my stitches securing them to the sleeve.

I decided it was time to make up the skirt, I started with the silk taffeta panels, sewing them together using a back stitch, this process was then repeated using a silesia lining layer.
Screen Shot 2020-08-05 at 20.59.39

When complete I had two tubes of silk and silesia. I thread marked the centre front and the centre back on both to ensure I wouldn’t get muddles when it came to bringing the layers together. I then pressed open the seam allowances on both the silk and silecia layers. With the help of a few classmates the silesia layer was inserted inside the silk layer, wrong sides together, it was very difficult to get the two layers to lay flat with one another on my own so the extra hands were appreciated. I then pinned along the top edge of the skirt making sure all of the seams lined up. I then sewed a running stitch down each seam to join the seams together flush and prevent them from separating.

Screen Shot 2020-08-05 at 21.00.29

I then moved onto hemming the skirt, I knew what the drop of the skirt was from waist to floor thanks to the pattern so I was safe to hem the skirt.
The hem was created by folding up 1 ½”, then ½” of silesia was trimmed away, the remaining ½” of silk taffeta was folded down and a small running stitch was sewn securing the hem in place.
Screen Shot 2020-08-05 at 21.01.58

I then measured up from the hem to mark the waistline, I referenced the pattern to ensure I got the subtle gradient. This was then marked by a running stitch all the way around the skirt.

Next I created the centre back opening, the measurement for this is marked on the pattern which I transferred onto the centre back panel of the skirt. The centre back is then slashed open to this point, the silk taffeta and silesia are then turned inwards (same process used on the sleeve plackets) and whip stitched down. I then sewed a bar tack at the bottom of the slash to prevent it from opening any further

Moving onto pleating up the waistband, I transfered where the pleating finishes and the gathering begins onto my skirt panels. I decided it would be easier to sew in my two lines of gathering stitches before pleating up the waistband. I positioned one line just above the waistline and one just below the waistband.

I pleated the skirt on a stand which I had previously padded up to size, I pinned a petersham tape to the stand at the waistline which I would use to pleat onto (this was purely used to help stabilize the pleats on the stand so I had something secure to pleat onto). Starting at the centre front I pleated the skirt fabric onto the waistband alternating from side to side to ensure it would be even. Once I reached the notched point that indicated to stop pleating I went back and checked all of the pleats and made any minor tweeks if needed. When I was happy I tacked the pleats down using a large herringbone stitch, removing the skirt off the petersham tape in the process. When I was happy the pleats were secure with the herringbone stitch I removed it from the stand.
I moved onto gathering the remainder of the skirt, I got out a measuring tape and pulled in my gathering stitches on the waistline until I had reduced the section of fabric down to 4”, I then tied off the long strands of thread. The skirt was now reduced down to the waist size.

Screen Shot 2020-08-05 at 21.03.37At this point I came back to finishing off the bodice, I started with sewing the piping and bias binding onto the neckline, leaving a little bit extra for finishing off the centre back. The bias binding is used to conceal the raw edge of the piping on the neckline.
Next the vandykes had to be sewn on, the smooth side of the vandykes went on with ease as I was following the construction line for this on the pattern. The pointed side of the vandykes was more difficult as explained in my toile process. There is an additional point added to the pattern for the vandykes which makes it impossible to get it to lay flat against the bodice. With a lot of easing I did my best to get both sides to sit evenly but I could not prevent the wrinkling.
The vandyke was then sewn down in the ‘ditch’ of the piping to hide visible stitching.

Next the piping and bias binding were sewn to the lower edge of the bodice, the bottom of the vandyke is caught during this conseaming its raw edge in the process. Like the neckline the bias binding is folded up to conceal the raw edge of the bodice and piping and then whip stitched into place.

Screen Shot 2020-08-05 at 21.04.37
The centre back was finished by adding piping to the edges of the opening, a strip of taffeta cut on the straight 1 ½” wide is then sewn onto this edge with ¼” use as seam allowance, 1” of the strip is then visible and the remaining ¼” is turn inward and whipped down. This finishes off the centre back placket.

Screen Shot 2020-08-05 at 21.05.43Attaching the waistband was my next step, I decided to test Janet Arnold’s instruction for this to ensure the skirt would fall correctly.
On the bodice pattern there is a notch on the side seam side of the dart, this notch indicates that between the notch points the skirt/waistband is not attached to the bodice but that it is sewn through to the bodice on the other sides of the notches.
I tested this by pinning the skirt onto the bodice from the centre back through to the notch points leaving a gap where the skirt was not pinned to the bodice of about 8” across the centre front. The skirt sagged between these points, the white waistband surely would have been visible as it dropped below the centre front point of the bodice.
Unfortunately I didn’t take a picture at this stage so I have drawn on a picture of the dress to help illustrate what I saw.

Because of this I decided to take another look at the pictures I had taken when examining the dress, focusing on the waistband on the front of the bodice.

Screen Shot 2020-08-05 at 21.06.53Taking a closer look there appears to be threads beyond the notch point which may have once held the waistband in place across the centre front. There are also small holes in the lining which line up with the waistband level which could further indicate that it was sewn beyond that point.

With this information in mind I decided to proceed with attaching the waistband across the centre front of the bodice.

I attached the waistband by first folding the top of the skirt along the waistline (folded so the lining was folded in on itself). This fold was then matched up with the lower edge of the bodice so that the fold lined up over top of the piping. The skirt was then sewn onto the bodice through the piping ditch being sure to catch the fold while doing so. At the notch points I stopped and tied off my threads and then continued from the other notch point round to the centre back. I then lightly pressed down the fold and whip stitched it down to the lining in order to keep it flush with the body and not add extra bulk.

The waistband is then sewn on, the waistband is made from a strip of silesia cut on the straight ¾” wide (2cm). I noted on the original that the waistband folds in on itself so there is now raw top or lower edge. Because of this I cut mine 4cm wide and ironed up 1cm on the lower and top edge.

Screen Shot 2020-08-05 at 21.08.22The waistband strip is then applied evenly over the skirt and bodice join, a running back stitch is then used to sew it onto place along the top and lower edge of the waistband. Between the notch points across the centre front I pinned the waistband to the skirt though the bodice following the straight direction of the waistband before the notch points. This lifted the skirt and fixed it in place preventing it from falling down like in my trial. The waistband is sewn across these points.
Screen Shot 2020-08-05 at 21.09.49

To finish the dress off fastenings were sewn. The original dress closes with metal hooks and hand work loops down the centre back with one single metal loop sitting on the waistline. I replicated this assortment of hand worked loops, metal hooks and single metal bar. The sleeve cuffs are also closed using two metal hooks and two hand worked loops.


Styling

Styling is one of the elements your judged on for the competition, this focuses on how you display the garment when submitting final pictures and displaying it at the conference. You can style your garment as little or as much as you want but the basic expectation is to achieve a period silhouette through period foundation garments. In addition you could create a chemisette, under sleeves, a hat or any sort of clothing or accessory item that complements the garment.
I believe styling items do not need to be sewn in accordance to the period of the main garment, neither of my two styling items were hand sewn and I wasn’t questioned if they were or not. This makes sense as it is the main garment you’re being judged on with the styling items just being used to assist the appearance of your garment.

I used two items to style my my dress, I used the 1830s petticoat I made in second year to give the skirt its full shape, you can read about how I made my 1830s Petticoat Here. I also made a small corded bustle from The Workwoman’s Guide Page 54 Plate 11 fig 31, you can view the book for free online using Google Books Here (Workwoman’s Guide 1838). There is also a copy of the book in the Wimbledon College of Arts Library for my fellow Wimbledon Students!
Admittedly the bustle did not kick out the skirt as much as it should have an I really should have made another that had more volume, this was the only negative feedback I got during judging but I will talk about that more in a bit.

Screen Shot 2020-08-06 at 18.01.01

I displayed my dress on a stand (I worked on this stand throughout construction), I decided not to make a pair of stays for the dress as I felt I achieved a good shape without through padding the stand.
You could also take pictures of the garment on a live model and or in a scenic location but for detail shots I really recommend taking pictures on a stand in a controlled environment to best display your workmanship.



Final Judging

While I can’t speak from personal experience what judging would be like at The Costume Society Conference (though the guidelines do give you a good idea) I can speak from experience what judging is like during a pandemic should that situation arise again!

After being contacted about being selected as a finalist (27th of March 2020) we was told that they planned for judging to go ahead in some physical form but they weren’t sure how, along the way suggesting it could be postponed to as late as September/October 2020.
As lockdown continued we were told that judging would go ahead on the 26th of June 2020 via Microsoft Teams with Michele Clapton on the judging panel. As there was no physical judging, the original powerpoint we sent in would be used for judging and we were told to create an addition three slides on our research to accompany it.

If its not already clear three slides for research is not enough.  I had prepared so much to bring with me for final judging, the full workbook you’ve just read, research notes on the four dresses I viewed, a sample book containing each technique used on the dress in addition to the requested print of the appropriate POF book pages and my patterns. 
I was so, so disappointed that the judging had been condensed down like that in addition to not being able to see the dress in person.
I 100% understand the reasoning behind it but I just felt so deflated by it.

On the 26th of June 2020 judging took place, we each had an allocated time to join the MS Teams call where we would speak face to face (via video) to Michele Clapton for fifteen minutes while Joanna Jarvis and Louise Chapman (members of The Costume Society) listened.
Michele asked all sorts of questions to do with the pattern, issues, examining the dress, time management, fabric selection and the underpinnings.
I was overwhelmed with the incredible positive feedback and it was truly such an honour to hear it come from Michele. She said many lovely things including,
That I evidenced throughout and had an excellent understanding the process… the dress was made with great confidence… that I had excellent time management… I had a key attention to detail…the photography and presentation was excellent and evidenced your methods and final outcomes very well. The only natural feedback I got was regarding the bustle at the back and how it didn’t quite lift the skirt as much as it does in Janet Arnold’s illustration of the dress, which is fair enough and I agree (silently kicking myself).
I was so pleased with myself coming away from the video call, later that day we were emailed the results.

I was awarded The Highly Commended Award (2nd place) and a cash prize of £400. I feel truly honoured to have my work recognised at such a high level.



Post Award Reflection

A few weeks later I received my cheque and certificate in the mail which for me nicely tied a bow on the competition and I could finally call it finished.
I’m really thankful I made the decision to enter the competition, it gave me the opportunity to really push myself and my skill set to create something truly spectacular. I’ve learnt so much about period sewing, my hand sewing skills have greatly improved in both speed and precision. This was also a fantastic research based project too and I’m glad I made contact with Gloucester Museum about examining the dress as it had a huge impact on how I reproduced the dress. It also gave me a good experience in time management as I juggled all of my deadlines in third year. I would come into the studio at 8:30am and leave most days at 8:30pm having worked on the dress all day and somehow managing to write my dissertation along side it.
I am disappointed that The Costume Society Conference could not go ahead for physical judging as I feel that would have really enhanced the experience.

I really recommend doing this competition, it addresses so many disciplines as a costume interpreter and executing them all with precision will undoubtedly reward you with a stand out portfolio piece. It shows research based skills, pattern toiling skills and period construction skills all of which are highly valued.

I’m not going to go in to any detail at this stage but I believe this competition has already opened doors for me within the film industry. I’ve also potentially found a temporary home for the dress before it’s sold. Things are looking good, I’m just waiting for lockdown restrictions to ease more for the film industry to get moving again so I can get to work!


Big thank you to all of the costume staff at Wimbledon College of Arts, my friends for their support (and tea breaks!), my class mates (sorry for taking up an entire cutting table for a term!), Gloucester Museum, National Trust Killerton and all of the lovely support I received online along the way.

If you would like to view images of my dress you can find a collection on my instagram @nivera.costumes
If you’re interested in hiring me please do get in touch using my email address nivera.costumes@gmail.com

IMG_0038

Advertisement

Examining a 1905 Corset V&A T .228-1968

Today I had the pleasure of visiting the Clothworker Centre for the first time. I was able to examine two corsets, spending an hour with each one. This post will share my notes and photos from the first of the two corsets I examined, I will share my notes and photos  for the second of the two corsets in the next few days.

The first corset is from 1905 made by S&S Corsets and its museum number is T. 228-1968


Front Observations

Blue cotton twill has faded much over time and the corset is now a very pale blue and mostly appears to be off white.
IMG_9854

Straight busk, five hooks and eyes. The holes for the eyes are lightly frayed. The hook side of the busk has ’S&S’ printed onto each individual hook.
IMG_9852
The busk is inserted  between a facing. Satin (used for the boning channels) has also been caught into the facing which has been top stitched down, this encases the busk. A braid of flossing has been sewn at the bottom of the busk, I imagine this it mirrored at the top of the busk also to prevent any movement.

 

 

Flossing adorns each boning channel at the bottom of the bone, the top of the boning channel does not appear to have flossing, lace covers this area. The flossing design is a cross pattern consisting of five strands of flossing that do not intersect with one another.
IMG_9856

 

 

 

 
The bone inserted on the side of the corset consists of a similar flossing design though on a larger scale, this flossing design does intersect with each other in a weave pattern. This floss pattern is made up using 16 threads.  This boning channel is much larger, referred to as ‘wide bones’ in archive description.
IMG_9857

 

 

 

 

 

 

Cotton ribbon insert lace decorates the top edge of the corset, the cotton lace is dagged with two rows of ribbon insets approximately 5mm part from each other. The ribbon inserts appear to be white/cream though originally could have been blue to match the body of the corset.
IMG_9853

Boning channels are external and appear to be made up from satin which is topstitched with a small stitch length into place.

 

 

 

 

 

 

 

 

Back Observations
IMG_9858
IMG_9859Between wide bone positioned on the side of the corset and the eyelet panel there is a section of three bones clustered together. The cluster of boning channels also feature flossing. There are four strands of thread to make up the cross over flossing design, the design does not incorporate  wearing and the flossing lays over each of each other.

 

 

 

img_9860.jpgThe eyelet panel is boned on either side, on the CB the bone runs the full length of the CB. The bone on the opposite side of the eyelets runs from the bottom edge until the third eyelet from the top and stops, rust has visibly bleed through the twill here. Continuing from where this bone stops two bones half its size continue upwards.

 

 

 

 

 

IMG_9861There are 17 eyelets in total running the eyelet panel, the topmost one is completely hidden by lace, the one lower to this is half covered by the end of the lace.
Both bones on the eyelet panel have a braided flossing very similar to what holds the busk in place.

Simple bias binding runs the bottom edge off the corset, top stitch in place presumably to catch the underside of the bias tape in the process as one full stitch motion.

 

Interior Observations
IMG_9865

 

IMG_9867Flossing thread is visibly prick stitched through with very little thread showing through. No flossing along top bones, no prick stitching visible.

 

 

 

 

 

IMG_9871Small ’S&S’ corset label on left hand back side with 23” written on it, only a short distance away on the side closest to the eyelet panel is ’23’ written in pencil. Indication of waist measure.

 

 

 

 

 

 

IMG_9870A waist tape featuring more branding from ’S&S’ is still very vibrant, the statue of liberty is featured also. The waist tape which is stamped in blue cursive writing on the right hand side with ‘NOUVELLE FORM DROIT DEVANT’ and on the left side with ‘THE S & S CORSET REGISTERED made in Belgium’.

Thread holding lace down is visible along top edge, long running stitch with small pricks to catch the lace. Thread is also visible running through the bias binding.

IMG_9872Eyelet panel appears to have been made with excess fabric on the CB so that it can be turned back to the wrong side, reenforcing the panel at the same time. 

 

 

 

 

 

 

Additional Photos

IMG_9863

IMG_9873


I’m really pleased I got the opportunity to examine these extant corsets, corsetry is still something that I’m very interested in, seeing these up close and being able to soak up all of the craftsmanship was an amazing experience.
I know for sure I’ll be back at the Clothworkers Centre sometime soon. I’m starting to weigh up my third year project options and making something that I can view in person through the Victoria and Albert museum archives should benefit the project. There are a few pieces I have in mind but I’ll wait for our briefing in a few weeks time before making any big decisions.

Thanks for reading,

-Nivera

1870s Corded and Quilted Corset

The latest corset I made apart of my Corseted through the Century Challenge is a lovely 1870s quilted and corded corset.

This corset caught my eye as soon as I opened ‘Stays and Corsets’ though it seamed intimidating at first but I’m happy to report I really enjoyed this process and learnt a lot along the way.
For this corset I used a light royal blue cotton drill (two layer corset), all boning channels, quilting and cording sewn in a gold thread while interior construction was sewn in a matching blue. And of course the flossing, sewn in a matching gold embroidery floss.

Below is a picture of my materials alongside the surviving historical corset my pattern is based on.
fb50f722cb04d788810501809b2bf175313f1b80r1-642-680v2_hq
The pattern was drafted following the books instructions, with alterations to the waist measurement as I’ve since found this book on some bodies isn’t reliable with maintaining the suggested waist size and often the waist measurement will be 3+ inches larger than it should be at no mistake of the pattern drafter. So I downsized the waist size by three sizes, I’d tried two previously which resulted in a full closure corset without reduction (too large).
Screen Shot 2018-12-09 at 18.23.20
The fabric was then cut out (on the fold) with added seam allowance.
11011646dceb6b92e02d4dd0e704b7b34c1249aer1-1536-2048v2_hq
Carbon paper was then used to transfer markings to the wrong side (lining) pattern pieces. Stitching lines (boning channels) and seam allowances. The wrong side of top gusset and hip pad pieces also had seam allowance and grain lines transferee in carbon paper. This makes inserting them easier and grading out the quilting.

I decided to sew the quilting first which now I’m looking back on it would have been better to sew the two layers together in this process rather than just the ‘top’ fabric. I used the grain to ‘set’ the direction of the quilting and then used the edge of my quilting foot as a width guide for the squares which are approximately 7mm/7mm in size. This was a full days work of sewing
2d9948525d90e8ca4c951709b1ae6fe36fec7511r1-1080-1921v2_hq
Next was sewing the gussets, I hadn’t sewn gussets into a corset before so this was a new technique for me. Because I used the two layer method for this corset I assembled each layer gusset into the corset individually so when I was finished I still had two separated layers. I don’t know if this was the correct way of assembling a corset like this however due to the cording and boning (mostly vertical) it made sense to me to keep the layers separate so that they were joined as I sewed the cording and boning in.
Everything was carefully basted before being sewn by matching with the basting removed when everything was complete.

I had originally intended to sew the gussets in with the colour matched blue but decided to go with the gold and keep up with the contrast theme. I decision I’m very happy with.
And finally the hip padding (not sure thats the right term but its what I’m going with), this took a very long time to baste in correctly and I kept having my needle catch where it wasn’t supposed to. You know when something puckers and it looks horrible but the cause is something so small? That’s what kept happening, one stitch too many!
967458ac67f33188ff3dbfae457288a8c89624e5r1-1536-2048v2_hq
The busk was then inserted which joined the two layers together. I’m getting much quicker at inserting busks.
My next step was to start inserting the boning and cording working from the CF (busk) outwards. This was lengthy. I also had to be really cautious of keeping the two layers together so they mirrored without a shift. I did start with sewing a boning channel/cord on one side then doing the same on the other side but this just became a hassle so I completed one side then the other. To ensure my boning/cording lines of sewing hit the right mark on the hip pad boning line I sewed a running stitch on the top layer where it would be sewn later down the track. This just meant I could sew the lines to where they needed to be a whip the running stitch out to be sewn in properly when it made sense.
Hopefully the below picture makes more sense than I am! (The red stitches are just tacking lines to hold everything on place, its the gold running stitch we’re looking at!)
Screen Shot 2018-12-10 at 16.56.47
I continued cording and sewing the boning channels until it looked something like this,
4e46ff52dcf0236fd7fa9cbc7b85958cada3948fr1-801-1024v2_hq-1
Keeping cording straight is defiantly an art and is something I am yet to master but as a whole I’m extremely pleased with this outcome!
But of course, the other side has to be sewn too. Which went about as smoothly as you’d expect. Apart from that time I read my placement lines wrong and started cording about an inch below where it was supposed to start.img_8603.jpg
All of that was unpicked and I had to start again.
One thing I really like about vertical cording is that you can see that progress your making which I found really motiving.
img_8604.jpg

When all of the cording and boning channels were sewn it was time for eyelets and steel boning. I need up using the eyelet press at uni for this corset as I didn’t bring a hammer with me to London for term (do you blame me?). I made a big o’l error here but we’ll get to that.
For boning I used a combination of flat steel and spiral steel. The spiral steel was used for the bust and hip pad channels while the flat steel was used everywhere else.
Satin bias binding was used to bind the edges, I think it looks really elegant and the slightly darker blue is a nice contrast. For flossing I used the original corset flossing as reference. Its very simple but its position and shape works really well with the overall design.
img_8409.jpg
The first try on reviled a few things.
Lets start by ignoring my wonky busk in this picture, it does sit centrally but I attempted to move (my boobs) while I was wearing it which shifted its position.

Things I learnt making this corset

  • I now know that the cotton drill I bought for my recent four corsets has a stretch to it. It was something I didn’t really notice but now that I’ve put two and two together it really makes sense that this corset may measure 24″ at the waist when flat but 26″ at the waist when worn. Because it stretched. It hurts my soul a little bit with close to thirty hours put into this corset but its taught me the valuable lesson on properly identifying my fabrics before using them. Would it have been more beneficial to have learnt this lesson three corsets ago? Yes!
    Regardless of this utterly stupid mistake I hold my head high knowing that this is still a very good example of my skill, it is a lovely corset and 2″ of reduction is still reduction at the end of the day. Its a very comfortable corset to wear (thats probably the stretch HA) and I’d go as far as saying its the most comfortable one I’ve made.
  • Reenforcing the eyelet panel is a must and on this occasion I forgot. I did add an extra 2″ to the CB so that they could be turned inwards creating a facing/also reinforcing the eyelet channel. However, when I was finishing off the last of the cording and boning towards the CB I cut down the 2″ so I’d ‘just’ have enough to turn them to the inside. I realised pretty quickly the mistake I had made. What I should have done is open it up and sewn in a facing which would also cover the eyelet channel and reenforce it. But in my head I thought I’d be okay and that it would be alright just this once. Cue eyelets tearing on the first try on. The eyelets only tore at the waistline (luckily none tore out), I was able to ‘save’ them by binding the hell out of them and secure them. It probably didn’t help that my fabric had a stretch to it either, this will be a running joke until I’ve learn my lesson!!
  • Spiral steel should ideally be used in any curved boning channel. Initially I tried using flat steel in the over bust channels but it ‘cut’ into my bust resulting in an unflattering and unnatural shape. These steels were replaced with spiral steels and the shape was greatly improved. I wouldn’t say this was something I learnt, I did know this before hand it was more something I accepted. I’ve been really stingy when using spiral steel and I shouldn’t be. It is a brilliant material to work with.
  • Cording is cool. I really enjoyed cording this corset, although is was straightforward and repetitive it kept me thinking constantly. With my next corded corset I’d like to focus more on symmetry as I know this corset isn’t symmetrical, I think to accomplish this I’ll need to use a cording needle which I will experiment with.
  • I need more practice with inserting gussets, I’ll give the ones I did on this corset a pass but I’d like to do better next time around

Overall I’m extremely pleased with this corset. I think its beautiful and a true statement in terms of my skill growing. I’m going to continue challenging myself with each corset I make and endeavour to make the next one better than the last.

To finish up here are a few clear detail shots and a (grainy) shot showing off the waist reduction.
Screen Shot 2018-12-12 at 15.45.04Screen-Shot-2018-12-12-at-15.45.13.pngScreen Shot 2018-12-12 at 15.45.21IMG_8410
This corset only gives me 2″ of waist reduction but I’m amazed at how dramatic it makes my waist look. I am hoping to get additional photos of this corset over the holidays and I will make a new post containing those pictures as well as adding them to this post when they’re available. I have an 1820’s corset to complete over the holidays and I’d love to get the base of an 1880’s corset made as well which I will be updating here.

Comments are always appreciated, thank you very much for reading.

-Nivera

Examining an 1880’s Dress

Today I had the pleasure of examining an authentic dress from the 1880’s. I was lucky enough to have been lent this dress from my mothers friend who owns a vintage fashion shop. I was beyond excited when she pulled it out and finally had the time to examine it today.
Unfortunately there isn’t much history to the dress, there aren’t any identifying prints or names to be found on it anywhere. Aside from the label from the vintage shop identifying is as “Victorian, Silk, Skirt + Jacket c. 1880” there isn’t anything else to go on, which is a shame! I would have loved to have know who wore this dress or at least find out where it was made.
The dress itself is an olive green in colour although the colour didn’t pick up too well on my camera and reflected more of an shimmery grey/green.


Please note: I am no expert, I do one day have the hopes of becoming a dress historian/historical dress expert but at the age of 19 and only entering my second year of costume interpretation this October that is not the case.. Yet! Any comments made following in this blog post are assumptions based on my current knowledge and guess work. I would love to make a follow up post after speaking to one of my tutors and getting their opinion on these photos.
If you have anything to add to these photos/post please leave a comment!



Bodice Front

bodice-front-1.jpg

Bodice Back

Skirt Front
Skirt front 1
Skirt Back + Gathered Detail

Skirt Back 1Skirt Back 2

Sleeves


Full Dress
Full Dress 2Full Dress 3
Inside Bodice Detail


Inside skirt detail


I want to start by saying I was amazed by just how heavy the jacket/skirt was, I wasn’t expecting it to be that heavy but as the skirt and jacket are fully lined (canvas I think) as well as the silk it does make sense for it to have some weight to it.
I think the jacket has had some alterations after they were initially made.  The jacket trim appears to have been resewn on (it looks to be original but I’m not sure), I say this because the trim is current sewn on with what looks to be a long (hand sewn) running stitch with a cream (it may have been white at some stage) thread. This stitching is quite obvious and just appears to have been done in order to tack the original trim in place. I would imagine the original with trim was starting to come off which was why this was done. Alternatively it could be the original stitching (using a contrasting colour for some reason) but I’m not too inclined to believe this as it does look quite sloppy where other original stitching is fine and precise. There also a few places on the jacket where a blue thread has been used which is out of place with the rest of the garment, this mostly appears on the pipped edges of the jacket. After doing some research into fastenings in the Victorian era I believe the hooks in the bodice are all originals as well as the two on the skirt. I was fascinated by how small the eyelets were that the hooks attached to, they’re so finely sewn and ever so small. Clearly I need to practice my hand sewn eyelets more. I adore the sleeves, the pleating thats gone into them is lovely. I like the style of having the pleating at the top half of the sleeve and then finishing with a two piece sleeve. The bottom half looks as though it would have been fitted. The front of the skirt looks as though there was stitching forming an inverted triangle (though it wouldn’t pick up on camera with the sheen), perhaps some sort of decorative panel that had been removed. This could of course just be the result of the silk being pulled but I thought it was worth mentioning. I believe the velvet sitting just below the skirt hem is a dust ruffle of sorts, it was quite firm, likely lined with canvas as well.

This was a very fascinating exercise for me and is something I want to do more frequently through museum visits to the archives. As I’m very focused on corsets at the moment I would love to see what the Victoria and Albert museum has hidden away. I recently bought the VA book on ’19th Century Fashion in Detail’ which has shown me there is much, much more behind closed doors! I really want to do more historic dress research with this coming academic year.


So what do you think of this wonderful dress? If you have anything to add please do, as said earlier these are just my assumptions!

Thank you for reading,
Nivera

1890’s Wasp Waist Corset

Following my Corseted through the century project I decided to revisit the 1890’s as I wasn’t happy with my previous attempt at this decade. History was set to repeat.


For this corset I used Mandy Barrington’s 1890 Wasp Waist corset from the book ‘Stays and Corsets’.36de54e8d56da3b58199a2cbb7521be7ae112a85r1-986-449v2_hq.jpg

f0eff0b7f8917bfb55a5b1bd2422b8b36be5368dr1-1152-2048v2_hq.jpg
The materials I used were,
One meter of pink cotton drill
One 30cm Spoon busk
2 100m spools of poly thread
1 100m spool of topstitching thread
Embroidery floss

Pictured also is lace with ribbon insert and pink ribbon I intended to replace the red ribbon with.
Not pictured are the 4mm eyelets used.
I started by laying out my patterns onto my fabric (cotton drill) and drew out the seam allowances. I used 1.5cm on all of the interior seams and the CB and CF used 2cm seam allowances, this allowed for the fabric to be turned back to the interior of the eyelet panel and for the busk.

7f1c082e03bdd395d64358d2ba86b4597a5a4a36r1-1536-2048v2_hq-e1535295267539.jpg
The pattern pieces were then cut out.
b8b61bebe4837c590f8307f47bad1cdc3c7acf6er1-1024-768v2_hq.jpgThis fabric has a really nice diagonal texture to it which I really like for the top side of the corset so I’ve been using that rather than the untextured other side.

And then came my latest new corset adventure, cording. This is a historical technique and provides extra support along side boning although there are samples of corsets that use only cording for support.
c80d734c08ebaddbf3995e1a342f05f2f27f9dc0r1-576-897v2_hq.jpg
My book ‘Corsets’ by Jill Salen has a small tutorial for cording so I followed that with modern techniques.

 

 

 

 

 

 

I decided that I’d used carbon paper for transferring information over to my wrong side fabric. But I chose to use yellow which I soon realised isn’t a great choice on top of pink.

You can just make it out if you squint!

b9cc6064026df61aee2c19ed8d24c336cc8aad99r1-1152-2048v2_hq.jpg
I didn’t think the process over all that well and decided to cord before assembling the corset, although it’s possible to do this I highly recommend assembling and then cording especially if you’re cording a larger area of a panel!!

It was a very slow process but rewarding when complete! It took me eight hours to complete both the large panels.
Boning channels were also sewn in at this stage.
I wanted to give myself a break before starting the cording over the bust and decided to prepare the busk first. This time featuring a spoon busk!! First time working with one and they’re just as easy as rectangular busks, more curvy but plain and simple.
Sewn in with a zipper foot.
5dc9f8c6648167fbd45fc35c5ca7786405a84c32r1-1536-2048v2_hq.jpg
I also at this stage made the dumb mistake of using a pencil to draw guide marks for the busk which are a tiny bit visible on the completed corset! It doesn’t bother me too much is was just a bad decision especially when I have friction pens handy.

For the busk side with the eyes the fabric was marked where the eyes would poke through and then with my eyelet ouch holes were punched. Awls are best to use but I still haven’t acquired one. The eyes are 4mm at the widest part however I used a 2mm hole. The hole is then coated in fray check and left to set over night. The fray check will allow some stretch to the fabric allowing the hole to stretch over the eye and then fit snug to the stud with no loose fabric visible.

bab67059e71b4a8d12d63501dcfa12f598facd4ar1-750-1334v2_hq.jpg

The rest of the corset was then assembled.
858a8885a5ade24fb54420fc8a491b2cdb7eec62r1-574-577v2_hq.jpg

The bust cording was inserted at this stage leaving gaps for the boning channels.
a45e04823557abf8e5cbf5b2521e49c2df6d9643r1-1536-2048v2_hq
I used long tweezers to make sure it was sitting correctly and flush to the cording above. Before seams were closed off to the larger cording channels, boning was inserted into the horizontal channels as they’d not be accessible after.
ee04d75c0f79759a331dd125db8a77621d38f3bbr1-1536-2048v2_hq.jpg
After assembling the rest of the corset and sewing in the deep so that the two layers were flush with each other the boning channels could be sewn. This was a simple process as of the markings for the channels were on the wrong side of the fabric for easy identification and sewing. Whenever a channel needed to be sewn into the deep the corset was flipped to the right side for precise lines of stitching (just in case the layer done quite like up) being a few millimetres off can ruin the look of the neat and narrow channels!
Once the channels were all sewn it was time to insert the boning, I’m using 5mm flat steel boning which I ‘cap’ to remove any chance of the steels ripping through the fabric. It also makes inserting them into tight channels much easier.
The issues that I ran into (which I did foresee happening) was that the bust channels need more movement to them than the flat steel allows for.

You can see in the below picture how the bust boning is fighting the shape of the channels.
4d1dacd60638f4c060d6bd00117e062c16a176e9r1-1024-662v2_hq.jpg
This was a fight I would not win…
The channels need to be the shape they are for support and silhouette, so how is this fixed?
Spiral steel.
aca0c20766f2a3daec499d2fad8d5a38c6a12488r1-1536-1536v2_hq.jpg
I’ve been lucky with my last few corsets as they were functional using just flat steel but this corset has beat me!! Unfortunately I didn’t have a supply of spiral steel (the piece you see in my photos is from a old corset and that’s the only length I have) so I needed to order some in. I decided to buy 10m (buying it in bulk rolls was out of stock) which will be more than enough for at least two more corsets. I also bought proper spiral steel caps as my capping method isn’t function for spiral steel so these caps are necessary and a new corset lace as my current one is grubby and needs replacing.

After inserting the spiral steel into the bust boning channels I could seal the bottom of the corset up preventing the boning from coming out. I also zigzagged the bottom edge to prevent any fraying. The top and bottom edge of the corset were then bound in bias tape. I got store bought bias tape this time because I was emotionally ready to sew ribbon bias onto a corset again!
5ef5678ed5695c085104d0b3e844a87b0793dec4r1-750-456v2_hq.jpg
I also decided that I would floss this corset like I did my 1860’s one. This time I chose a more complicated technique for more of a challenge and it looks lovely!
15efc7da066ea96d2a2e3e7dc503581ebb33a430r1-1536-2048v2_hq.jpg
Flossing really does add to historical corsets and is something I’ll be incorporating into future corsets! After this I used my new 4mm eyelets and inserted them into the corset. Yes there a lot but that was the amount suggested in the book!

And then the corset was complete ready to be tried on!

f7b7f5197a81ea11d76b057ebe4986b27fecb83fr1-574-765v2_hq.jpg
9f01056413e0395ca371cd7b5be13102e5d77648r1-750-1150v2_hq40931dd7ca9eddd2e3d5f0c2c90c0f47e4d409fdr1-656-877v2_hq.jpgfd632ad5135b2aea6c4446c67a77f764222a3182r1-1536-2048v2_hq.jpg


I am very happy with this corset and I think it shows off skills as a seamstress quite well. I’m definitely seeing a steady improvement with each corset I make and considering thats the reason I’m making so many that makes me very happy. The corset is however, too large for me. It barley takes me in by and inch (the full closure measurement is 29″ my regular waist measurement is around 29.5″) when I should have been able to get 4” off with the pattern I drafted. I did however talk to a student who studied at AUB and Mandy Barrington was her tutor, she said that the sizing issue was common in her classes with Mandy and Mandy herself wasn’t sure why some students were having issues with the waist measurement being off. They gave me some great tips for altering the corset size which I will use towards my next one from this book!
I’m excited to move onto my next corset, I think I’ll do the 1880’s next. I’ve unintentionally been drawn the the last half of the century but I am just as excited for the first half of the century. I’d like to complete this challenge of mine before the end of the year but our head tutor sent out an email about the Golden Shears Tailoring Competition which I’m very interested in entering, I’ll probably make post dedicated to that once I’m back a uni and have spoken to our tutor about it further.


Comments are always appreciated! If you’ve worked with this book let me know how it went for you.
Thanks for reading

-Nivera

1860’s Corset

I was still in the mood for corsetry after completing my 1890’s riding corset and as I was in need of a new 1860’s corset as I outgrew my old one (lost weight) it seamed like the best choice.
This is my first corset from Corsets and Crinolines!! I feel really proud to say I’ve made a corset from that book and it will not be the last.
I used the 1860’s light French corset pattern.
9f48e12274e2c99aa49c702b401b6b5b37846bf2r1-538-293v2_hq
I did a lot of reading from others who’ve made this corset before to familiarise myself with it before beginning. I did make one major alteration to the pattern and that was removing the busk. The main reason for this is that I wanted to make a flat front corset because it meant I wouldn’t have to make a corset cover to protect the top fabric layers from the split busk. Me lazy? No. I also didn’t want to order a busk and have to wait for it to arrive. I wasn’t feeling a busk for this corset.

I scaled the pattern up to have a two inch reduction, I think I’ve got the hang of scaling patterns up now which opens so many more books for me.

After scaling my patterns I laid them out over my fabric following the grain lines. I’m using a different fabric for my corset this time, cotton drill. It’s cheaper than coutil but has similar properties. Although it does fray a little bit overlocking or zigzagging fixes that easy. I’m also using a different boning channel technique this time round, this time I’m boning between two layers of fabric which meant my fabric was folded twice to compensate for the extra layer needed.
b3bc4a7e3f0fe72600c9bff55b92af701795b5der1-1536-2048v2_hq.jpg
The seam allowances were then drawn onto the fabric (not included in the pattern) which were 1.5cm. I read now that 2cm is recommended for corset seams which is something I’ll be applying to future projects.
Because I adapted the pattern so that it removed the split busk and replaced it with a single busk the area would be reinforced with thicker steel bones (7mm) than the bones used everywhere else (5mm).

The patterns were then cut out.
a1c7a9ebadbaad22ece628d3ca66afcc329b3206r1-1024-768v2_hq.jpg

I then began the tedious process of transferring boning channels with carbon paper, pinning the lining fabric with the carbon markings together and then pinning the top layer pattern pieces together.

This got very confusing at times! As the pattern looked very similar un marked!

85721811add3053dc023cafc94a42f4f94e8a559r1-1536-2048v2_hq.jpg

All of the panels were then sewn together and I was left with watch would be my top layer and lining layer of the corset.
8170d2da91bb206171bbde0e5863c88bcb9aec7dr1-1024-768v2_hq.jpg
The two layers then needed to be joined together, I used a hand basting stitch and ‘sewd in the deep’ joining the layers together wrong sides together stitching in between the seams.
This basting stitch ensures that the layers are sitting flush with each other mirroring perfectly. This is crucial when sewing the channels.
099c02f4a111301af68931c46a3fa973cf363c31r1-873-475v2_hq.jpg
Next the boning channels were sewn using the carbon markings on the lining/wrong ‘right’ layer. The 7mm busk bones were sewn with 1cm channels while the 5mm bones in every other channel were sewn with 7mm channels. Some of these channels were next to seams so to create the line of stitching for the channel on the seam I sewd in the deep from the top layer of fabric to ensure the best accuracy so the top stitching would be hidden in the seam.
After the boning channels were sewn I sewd the stopper along the bottom edge preventing the bones from poking out. At this time I also zigzagged the sides and bottom edges to prevent any further fraying.
54b5ebf0e22cf40e710a7c9a4e948b41277800d7r1-969-556v2_hq.jpgNext the boning was cut and inserted into the channels, which was made much easier with the new pair of bolt cutters!!! Previously I’d just been using wire cutters but I kept blunting them and my mum wasn’t too happy with that!
The bones were also cheaply capped before being sewn in. I did this with masking tape, this just blunts the edges and stops the sharp corners of the steels from tearing out with wear. I am yet to use proper steel boning caps for a corset. I’ve also heard that nail polish works quite well so I may try that with my next corset.

The top stopper was then sewn in, sealing the bones in place.
c1233bbe17d3fc499a0160bd6b57cab1b2349648r1-1024-572v2_hq.jpg
I was then able to do a test fit, this would mean I could see what the waist reduction was like and if I needed to take the bust in (I have a small chest so I run into this issue with corsets often!)
adf0e027d450c1384e128ab43e01e33cf80018d6r1-943-2048v2_hq
I found that the corset only offered 1” reduction in my waist, which was disappointing. So I decided it needed to be taken in. The bust area was surprisingly okay so no alterations were needed there.
The next time I scale a corset I’ll scale it down to the waist reduction size I want minus 3cm and see if that gets better results.
I took the corset in by 3cm at the CF. This meant taking it apart… luckily it was rather easy and the alteration was quite straight forward. I removed the two bones acting as a busk as well as 0.5 to each side of them. I added a lot onto this pattern to begin with so removing it didn’t cause any issues.
After the alteration was made I re sewd the boning channels in as well as the top and bottom stoppers that had to be removed. The CF isn’t quite symmetrical as it was previously but it’s not as noticeable as I thought it would be.

I had originally intended to make bias tape for this corset because I again decided to be lazy and Oh Boy did it backfire. I decide it would be easier to bind the edge with satin ribbon as I had a coordinating colour in my collection. Machine sewing didn’t work as the ribbon was thinner than that it really should have been for it’s intended purpose and the machine stitched created bulk. So of course I had to slip stitch it into place.
And once it was slip stitch into place on the from it had too be whip stitched into place on the wrong side.
All of which took me a considerably longer amount of time that it would have to make bias tape and sew that on.

I was very happy to have the binding finished, at first I though the satin looked a little tacky and ‘costumy’ but I remembered that this is a Victorian corset from the 1860’s, the Victorians owned OTT.
What are you thoughts?

For this project I had promised myself I would give flossing a go as it looks very pretty and ads so much to the historical factor. I picked out a flossing technique (the most basic stitch I could find) and got to work.
fea8347912008393eddacf3e799693738fab26b6r1-745-444v2_hq.jpg
And I’ve got to say, despite being a simple stitch it really does look very nice!!!
6651ae5a8c16688dedd4d842e7fbbf8b28a3cb02r1-1536-2048v2_hq.jpg
*The two above photos were taken in bad lighting and don’t reflect the true colour of the fabric*

I’m definitely going to try out something more complex with my next corset. I’ve seen some amazing feathered flossing that look stunning in a contrasting colour.
With the flossing done, so was the corset!!5c26870e2c151a3e66a2def056206ab11455de8fr1-539-734v2_hq.jpgf7ce8ee7ad4d449cb5e77f05274ba8ace527348er1-750-1334v2_hq.jpg
I unfortunately forgot to save photos of the back of the corset and I’m not putting it on again just for that! I can say that I am able to achieve a full closure which I’m pretty happy with. However, I’m going to be using and binding metal eyelets for my next corset. Although my hand sewn eyelets are very pretty I don’t think they could take the tension of me cinching any smaller so I’ll need that reinforcement.

I’d really like to make a corset with cording or one that’s quilted next so I’m looking into those at the moment! Right now its a three way tie between 1880’s, 1870’s and 1840’s.


This corset takes me in by two inches and even though the reduction is small it has a great affect of my silhouette. 27″ is what I was aiming for with this corset and I’m pleased to have constructed a corset capable of that however with my next corset I want to achieve greater reduction. ‘Good’ corsets should be able to cinch you in by 3-4″ and thats something I’d like to do with my next one.
I shouldn’t have to say this but I’m in no way suddenly fascinated with achieving a small Victorian waist. My corsetry will remain safe and I’d never push myself to a health concern, I don’t wear my corsets long enough to do this anyway! My corsets are still only being worn for historical costumes and I won’t be making them apart of my daily wear any time soon. The main reason I want to make a corset capable of cinching me in smaller is because I see it as a showcase of the corsetry skill and its something I really enjoy and want to become better at.

So what are the thoughts on my latest corset? And what do you think I should make next, 80’s, 70’s or 40’s?

I’m back working on my 1860’s ballgown again and am hoping to have it completed by the end of next month, so long as my lace appliqué and sequins order comes speedily.
Updates coming soon.


As always thank you for reading
-Nivera

1890’s Riding Corset

My latest project which I completed in just two days! I recently got the book ‘Stays & Corsets’ by Mandy Barrington and decided to test out the patterning process from is with one of the simpler corsets from the book.

The corset pattern is dated to the 1890’s and is based on an existing surviving garment from the era.

This was a simple corset to put together, I had originally intended to make a lining so that the channels would be concealed (as seen in the original) but decided against it *was lazy* and went with good old twill tape channels instead.

Drafting/Construction

The first thing I did was draft a basic block with alterations to make it corset friendly.
1890sRidingCorset3

I then drafted the pattern according to the books instructions.

1890sRidingCorset9

And then cut the pattern pieces out.

1890sRidingCorset7

The patterns were then pinned to my cotton coutil following grain and a seam allowance of 1cm was added to internal seams while 2cm was added to CF and CB to allow for a busk and eyelet facing.

1890sRidingCorset14

When the patterns were cut out I transferred boning channel lines over with carbon paper for ease of identification.

The patterns were sewn together with the 1cm seam allowances and twill tape were pinned over the boning channel indicators.

1890sRidingCorset6

This was then sewn down.

1890sRidingCorset12

Facings were then made up for the CF and CB.
The CF facing was sewn to allow for the loop side and the hook side.
The CB facing was sewn to bulk up the eyelet area (prevents tearing) and to allow for a concealed boning channel opposite the twill channel with the eyelets running down the centre of the two.

The busk was then sewn in (this busk is from my first corset which is why some paint is missing from it with wear and tear).

1890sridingcorset5.jpg

Bias tape was sewn onto the right side of the corset at both edges. And was then slip stitched into place on the wrong side.

1890sridingcorset11.jpg

13 eyelets were marked evenly either side of the CB down the eyelet channel.

1890sRidingCorset10

Each eyelet was punched and hand sewn.
I’ve hand sewn well over 100 eyelets for costumes now and have managed hone the skill down to roughly 10 minutes each, which I quite proud of considering it took me twice as long when I first started!

1890sRidingCorset

And with the eyelets finished so was the corset!

1890sRidingCorset2

Here’s a picture of the original surviving corset the pattern is from.

1890sridingcorset1.jpg

 


 

Issues/improvements

Overall I’m quite pleased with the construction, my issues come from the fit.

As far as I’m aware I followed the books instructions to the T, at no point was I confused, it was a very simple process for me. Both drafting the pattern and constructing the corset itself. However, the corset only takes my waist in by half and inch where according to the pattern it should be taking me in by 3 inches.

My other issue with the fit is the bottom of CF, it doesn’t sit flush to me and there’s and abundance of extra fabric there which is visible in photos. It should be tight and it’s not, there’s so much extra fabric that it’s so loose the bottom hook of the busk keeps coming undone. It is however an easy fix, I can alter the bottom edge with a dart and bring the extra fabric in.

I think where I went wrong was in the block draft so I will be drafting a new block for future corsets from this book and see if that resolves the issues. 

Final thoughts

It’s a good corset but it’s too big for me and doesn’t give the reduction I’m after. I plan on making a wasp waist corset from the same book and will be drafting a new block for it.

Overall I made this corset to try out the book and it’s drafting methods. Which even with the result I got I do quite like. And it’s given me a good insight into flat patterning corsets on a block.


 

Has anyone else drafted this corset or used this book? Are there any secrets I’m not wear of?
Feedback is always welcome!

Thanks for reading,
-Nivera